Analog Devices Inc. EVAL-ADG5248FEBZ Evaluation Board is used to evaluate the ADG5248F, with an overvoltage protected 8:1 Multiplexer. The ADG5248F has overvoltage detection and protection circuitry on the source pins. It's protected against signals up to −55V and +55V in powered and unpowered states. The ADG5248F is soldered to the center of the evaluation board, and wire screw terminals are provided to connect to each of the source and drain pins. Three screw terminals are used to power the device, with a fourth terminal used to provide a user-defined digital logic supply voltage.
Dual supply: ±5V to ±22V
Single supply: 8V to 44V
Protected against overvoltage on source pins
Signal voltages up to −55V and +55V
LEDs for visual overvoltage indication
Parallel interface compatible with 3V logic
On-board LDO regulator for digital supply and control, if required
Analog Devices Inc. ADG5248F/ADG5249F Fault Protection Multiplexers
User-defined Fault Protection and Detection, 0.8pC QINJ, 8:1/Dual 4:1 Multiplexers.